|
Conveying
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 591 |
Electric Chain Hoist 500 kg. |
Abus |
|
500 kg |
1994 |
|
| 779 |
Manipulator |
Thyssen Henschel |
Andromat AM 550 T3/4 |
Max. 350 kg |
1992 |
In good condition. Fully cehcked ! Input voltage 400V/50Hz; with Siemens PLC controls |
| 799 |
Manipulator |
Thyssen Henschel |
Andromat AM 500 T3 |
Max. 350 kg |
1982 |
In good condition. |
| 843 |
Manipulator |
James Howden, UK |
Lamberton S 500 |
275 kg |
1997 |
min. vertical reach : - 740 mm;max. vertical reach :
2960 mm;min. horiz. reach : 1830 mm; Max. vertical reach : 5750 mm |
| 865 |
Manipulator 80 kg |
Thyssen Henschel |
Andromat AM 220 T3 |
approx. 100 kg |
1980 |
Manipulating weight: approx. 100 kg; completely overhoulded |
| 944 |
Electric pallet trucks ( 5 pieces) |
Jungheinrich |
|
|
1994 |
|
|
Core Shop
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 748 |
Core Sand Preparation and Distribution Plant |
Michel |
KAA |
2-4 to/h |
1991 |
Charge100kg; ball mixer. Automatic binder doser, distribution trolley, PLC controls |
| 849 |
Hot Box Shell Core Shooters |
SHALCO |
U 180/U190 |
Gas heated |
1970 (reconditioned) |
Size of the gas heating plates: 685 x 505 mm |
| 852 |
Core Sand Mixer |
LAEMPE |
SM 5 |
2 t/h |
1992 (Refurbished 20 |
Mixing plant:40 kg in ca.70s appr.(2 t/h) Drive:4 kW |
| 908 |
Amine Gasing Device |
Lämpe |
|
8 KW |
1986 |
heater: 8 Kw, 380/220 V, 50 Hz, cleaned |
| 922 |
Cold Box Core Shooter 5 l |
Laempe |
H5 |
5 Liter |
Refurbished |
Core box size max.: lxwxh: 400x530x400 mm; Gasing device, New S7 PLC controls |
| 924 |
Core Shooter 5 l |
Roeper |
H5 |
5 Liter |
Refurbished |
Core box size max.: lxwxh: 400x260x400 mm |
| 925 |
Core Shooter 12 l |
Roeper |
H12 |
12 Liter |
|
Core box size max.: lxwxh: 500x600x400 mm |
| 928 |
Complete Core shop (cold-box process)
for automotive castings |
HOTTINGER, LÜBER, KT |
Various |
|
1993/94 |
6 Hottinger CB core shooters, Lüber gasing devices, Lüber sand plant, KT Amine washer etc. SÜPER CONDITION |
| 929 |
Cold-Box Core shooter 25 Lit. |
HOTTINGER |
Fastcore 16-CB |
25 Liter |
1994 |
|
| 930 |
Cold-Box Core shooter 25 Lit. |
HOTTINGER |
Fastcore 16-CB |
25 Liter |
1994 |
|
| 931 |
Cold-Box Core shooter 40 Lit. |
HOTTINGER |
CB HS 16 HVA |
40 Liter |
1994 |
|
| 932 |
Cold-Box Core shooter 40 Lit. |
HOTTINGER |
CB 22-HA/HY/HL |
40 Liter |
1994 |
|
| 933 |
Cold-Box Core shooter 65 Lit. |
HOTTINGER |
CB 32 HVA |
65 Liter |
1994 |
|
| 934 |
Cold-Box Core shooter 80 Lit. |
HOTTINGER |
Fastcore FC-45 CB |
80 Liter |
1994 |
|
| 935 |
Core sand preparation & distribution plant for cold-box process |
LÜBER |
UCM300 |
6-8 to/h |
1994 |
|
| 936 |
Central amine gas distribution system |
LÜBER |
|
|
1994 |
|
| 937 |
Amine-gas scrubber plant 36.000 m³/h |
KT Germany |
KFVG |
2x18.000 m³/h |
1994 |
|
| 938 |
Core dipping robot |
Meissner |
|
|
1994 |
|
| 939 |
Core dipping robot |
Meissner |
|
|
1994 |
|
| 940 |
Coating tub for core dipping |
Meissner |
|
|
1994 |
|
| 941 |
Coating tub for core dipping |
Meissner |
|
|
1994 |
|
| 942 |
Core drying oven |
Local made |
|
|
1994 |
|
| 943 |
Monorail conveyor system for core transport |
Local made |
|
|
1994 |
|
|
Dedusting
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 920 |
Dry filter plant 29.000 m³/h |
Handte |
AAS2 |
29.000 m³/h |
1992 |
consisting of 4 nos dryfilter, control cabinet, fan, spare filter |
|
Melting Plants
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 726 |
Ladle Pre-Heater with dia. 2,10 m |
Heinz Rex |
Hub-Schenk |
|
1994 |
Ladle cover dia. 2,1 m with oxygen burner, Column jib crane with arm, pneum. Cylinder & pneum. Controls |
| 770 |
NF-Channel Type Pouring Furnace |
Otto Junker |
RDG-Ge3/150 |
150 kW |
87/99 |
Total/Usable capacity: 4,5 to/3 to; driven furnace frame with furnace body, Swich panel modernised in 99; with switch cabinet |
| 801 |
LF-Channel Type Induction Furnace for Brass 800 kg |
Russ / Leich |
IHS 3 Cr |
90 kVA |
1983/1998 |
Control Panel new 1998, Thyrotakt;
with gravity die casting machine IMR C 40 U |
| 830 |
NF-Capacitors 2x175 kVAr (28 pcs.) |
Otto Junker |
1760 V; 50 Hz |
350 kVAr |
1991 |
PCB-free; 28 pcs., each 350 kVAr; L x W x H 345 x 160 x (860x80) mm, weight/pc app. 60 kg |
| 846 |
Recooling Unit |
AAN |
|
280 kW |
2005 |
1 patternplate heat changer, capacity: 280 KW, quantity: 13,2 m³/h; 1 circle pump and various accessories |
| 848 |
LF-Induction Furnace Plant 23 to |
ABB/BBC |
IT9 |
4000 kW/50 Hz |
1973 |
23 to, 4000 kW, oil transf. 5000 kVA/10 kV, pcb-free capacitors (new 1994),without cooling system |
| 912 |
NF-Channel type pouring furnace 8 t/10 t |
ABB/ABP |
OCC 80 |
350 kW |
1982/2004 |
Total/Netweight: 10 to/8 to,
furnace moving system, commissioning is not included. |
| 917 |
Warm Holding Tilting Furnace 45 to |
AJAX |
|
780 kWh |
1978 |
Furnace Capacity: gros 45 to fl Fe,
net 35-to fl Fe CHANNEL TYPE INDUCTOR RENEWED |
| 921 |
Monorail electric pouring ladles 2x500 kg |
GEMCO |
|
2x 500 kg |
1987 |
|
| 927 |
MF-Induction Furnace 3 to |
Junker |
MFT Ge 3000 |
1600 kW/ 250 Hz |
1990 |
incl.: furnace body with hydraulic tilt, oil-transformer, hydraulic powerpack, spare body, but without water re-cooling unit |
|
Moulding Shop
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 670 |
DISA-Mould. Machine for Spare Parts |
DISA |
2013 A MK-1 |
upto 300 Mo/h; |
1973 |
DISA-DMM Moulding Machine incl. many Spare Parts |
| 871 |
Automatic Moulding Line |
Künkel Wagner |
VacuPress VP III |
120 moulds/h |
1983 |
|
| 913 |
Turntabletype Handform Plant 20 to/h |
Axmann |
DT 8/5000 |
20 to/h |
1994 |
Turntable with 8 stations, transfer Station, Vibratory-Table, Ejection station, Conveyor Belt, Furane Sand Cont. Mixer for chem. Bonded sand, Misc. Silos |
| 926 |
Jolt squeeze pin lift Moulding machines (2 nos.) |
BMM Weston (UK) |
CT3 |
|
1989 |
Table size: 914x 457 mm |
| 947 |
DISAMATIK Moulding Machine |
DISA |
2013 LP-A |
Mould size: 480x600m |
1985 |
DISA-DMM Moulding Machine |
| 948 |
DISAMATIK Moulding Machine |
DISA |
2013 MK 4 |
Mould size:500x650mm |
1981 (PLC controls 2 |
DISA-DMM Moulding Machine |
|
Sand Plants
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 838 |
Cont. Mixer for Chem. Bonded Sand 5 to/h |
GFA |
|
6-8 to/h |
1992 |
Continuous type Sand Mixer for Furane sand process
throat depths: 1,5 + 1,5 m
- with dosing pumps
- with Contactors controls
|
| 946 |
Sand reclamation plant for chem. bonded sand 2 t/h appr. |
IMF Italy |
Monobolc IP1515/A |
2 t/h |
1992 (in production |
Shake out grid , Pneum. sand conveyor
, Monobloc Reclamation plant in container with De-binding and de-dusting chamber, Sieve, Cooler and pneum. sand conveyor
Container size: 2585x2435x4000 mm |
|
Various
|
| Pos. |
Article |
Manufacturer |
Model |
Capacity |
Year |
Technical Details |
| 787 |
1 pcs. Compressors |
KAESER |
SIGMA Profil SX3-90 |
2,2 kW/0,3 m³/min |
1991 and 192 |
2,2 kW/7,5bar/0,295 m³/min |
| 788 |
3-phase Dry Type Transformer |
Hinzen - Germany |
DG 315/20 |
315 kVA |
1995 |
DG 315/20, 20.000 +/- 5% / 528 V; 9,09/344A,
Dyn5, with transformer protection and voltage converter 0,6/3kW |
| 916 |
Forklift |
Kalmar LMV |
DC 16-1200 |
16 t @ 1200 mm |
1987 |
Fork lenght:
2.300 mm, Working height :
3.685 mm Weight:
cca. 23 t, Worktime: 11430 hours
In very good condition and regularly maintained. |
| 918 |
Wedges (3 pieces + 1 Spare) |
Clansmann |
|
|
unknown |
|
