Stock List » Capacitors

Capacitors for Induction heating & melting

Exclusive agent for EU: TCT Tesic GmbH

The company’s expertise focuses on design and manufacture of capacitors for every segment of the power industry, e.g. LV, MV & HV Power Capacitors, P F Correction equipment, and for very special applications such as Induction heating & melting.

Raw material inputs are sourced from the world’s foremost manufactures of BOPP film, Aluminum foil and insulating oils and manufacturing carried out in an ISO-9001:2008 accredited facility, to produce world-class capacitor products. All capacitors are extensively endurance and life-tested, to comply fully with international & IEC specifications.

APPLICATION
Medium and high frequency water-cooled/ air-cooled capacitors are specially designed for use in inductive heating & melting plants for power factor improvement as also for tuning of the circuits for varying inductive loads.

POWERTHERM water cooled capacitors are uniquely designed to deliver optimum performance at very economic operating cost, viz. power loss which are limited to maximum of 0.12 Watts/kVAr on start up and 0.1 Watts/ kVAr after 500 hrs of operation. The extremely low watt losses contribute significantly in enhancing the capacitor life expectancy levels.

QUALITY SYSTEM
Quality Assurance System ISO-9001:2008 is adhered to.

EMERGENCY REPLACEMENT
We supply Capacitors required as replacement to induction furnaces, with every effort to closely match dimensions of the failed units. Please contact us with a sketch of the failed capacitor, showing critical parameters such as terminal arrangements and case dimensions. Shipments against emergency orders are made in less than 2 weeks. Like all our products these capacitors are supplied with a 24 month guarantee.

Technical Specifications:

Output:	Up to 8400 kVAr
Voltage:	Up to 4000 V AC
Frequency:	Up to 20.000 Hz
Phase:	Single Phase
Cooling:	Water Cooled
Mounting:	Horizontal / Vertical
Casing:	Aluminum / Brass
Case Design:	Isolated (Dead) / Live Case
Protection:	Thermal & Over Pressure Cut-off
Standards:	IEC: 60110-1, EN: 60110-1/-2 ISS: 9251

POWERTHERM CAPPACITORS INDIA PVT. LTD.
Regd Office & Plant:
C-103, MIDC Sinnar,
Nashik - India
http://www.powerthermindia.com