Our current Stock List

Pos.	Article	Manufacturer	Model	Capacity	Year	Technical Details
Melting Plants
726	Ladle Pre-Heater with dia. 2,10 m	Heinz Rex	Hub-Schenk		1994	Ladle cover dia. 2,1 m with oxygen burner, Column jib crane with arm, pneum. Cylinder & pneum. Controls
770	NF-Channel Type Pouring Furnace	Otto Junker	RDG-Ge3/150	150 kW	87/99	Total/Usable capacity: 4,5 to/3 to; driven furnace frame with furnace body, Swich panel modernised in 99; with switch cabinet
801	LF-Channel Type Induction Furnace for Brass 800 kg	Russ / Leich	IHS 3 Cr	90 kVA	1983/1998	Control Panel new 1998, Thyrotakt; with gravity die casting machine IMR C 40 U
827	MF-Induction Furnace 8 to (REFURBISHED)	Inductotherm	VIP Power Trak	7000 kW/ 200 Hz	1997	incl.: furnace body with hydraulic tilt, oil-transformer, hydraulic powerpack, spare coil, primary water re-cooling unit, refurbished
846	Recooling Unit	AAN		280 kW	2005	1 patternplate heat changer, capacity: 280 KW, quantity: 13,2 m³/h; 1 circle pump and various accessories
848	LF-Ind. Furnace Plant 23 to, COMPL. REFURBISHED	ABB/BBC	IT9	4000 kW/50 Hz	1973/2008	23 to, 4000 kW, oil transf. 5000 kVA/10 kV, NEW PLC S7 control panel, pcb-free capacitors (new 1994),without cooling system, compl. refurbished and dismantled
912	NF-Channel type pouring furnace 8 t/10 t	ABB/ABP	OCC 80	350 kW	1982/2004	Total/Netweight: 10 to/8 to, furnace moving system, commissioning is not included.
927	MF-Induction Furnace 3 to	Junker	MFT Ge 3000	1600 kW/ 250 Hz	1990	incl.: furnace body with hydraulic tilt, oil-transformer, hydraulic powerpack
955	Channel Type Warm Holding Furnace 40/55 ton	ABB/BBC	IRT 100	800 kW	unknown	Furnace body with hydraulic tilt legs, 1 inductor, hydraulic power pack without electr. switch cabinet
962	LF-Channel Type Induction Furnace for Brass	Russ		approx. 100 kVA	unknown	Control Panel,Type Thyrotakt
975	MF-Induction Furnace 500 kg for GG/GGG	5M	Power Melt	350 kw/ 300 Hz	new	fbox type furnace hydraulically tilted, hydraulic powerpack, water cooling system
992	LF-Ind. Furnace Plant 3 to, with Saveway	Induga		600 kW	1997	3 to cap., Transformer 700KVA/400V/50Hz, Siemens S5 PLC controls, PCB free capacitors, without water recooling system, dismantled
993	MF-Induction Furnace 1,5 to	Junker	MFT Ge 1500	1000 kW/ 250 Hz	1985	incl.: furnace body with hydraulic tilt, hydraulic powerpack
998	Mg-Wire injection equipment	Odermath	3133-13		1995/2006	Mg-Injection machine; Lid for treatment ladle; Cabin for treatment with suction hood ( without filter plant); Siemens PLC control panel

↑ Top of page TCT Tesic GmbH • Im Kurzen Busch 11 • 58640 Iserlohn • Germany
Tel: +49 (0)2371 / 7726 0 • Fax: +49 (0)2371 / 7726 10 • Email: info@tct-tesic.com