Offers

Used foundry equipment

Fastloop Moulding Line and Sand reclamation plant 15 t/h

Flaskless molding line consisting of: 1 Continuous Mixer for Furane sand, 12 t/h 1 Vibration table, model D 760 x 1290 mm, max. load 1280 kg Driven rollers Fast Loop size 3 5 stations for

MF-Crucible furnace 2x600kg for Copper Aloys

Mainly consists of: · 2 crucible furnace inserts with tilting chair á 600kg, without furnace lid · With hydraulic cylinders; hydraulic system; hydraulic control panel, year unknown · IGBT converter cabinet with capacitors, control panel

Balancing reactor 500 kVAr

Mainly consists of: No. 204676 Rated voltage: 660 V // 50 Hz Rated current: 758 A Cooling type: AN Total weight: 1.18 t

Emergency generator 77 kVA

Essentially consisting of: Emergency generator 77kVA; 61.6 kW; 400/230V; 111.1A Revolutions: 1500 Weight: 1138 kg With diesel generator Manufacturer: Perkins Exciter voltage: 39V Exciter current: 1.95A Voltage regulator: SX 460 Sold as seen, EXW

Balancing reactor 250 kVAr

Mainly consists of: Rated voltage: 945 V Rated current: 265 A No.: 9026108 Weight: 530 kg Sold as seen, EXW

DS dry-type step transformer 500 kVA; 380V

Mainly consists of: DS dry-type step transformer 500 kVA R2 No. 9026105 Sheet metal package with 3 coils + P&O tap changer Rated voltage 380/221 — 907 — 944V Rated current: 760-45/78 — 318 —

DS dry-type step transformer 500 kVA; 380V

Mainly consists of: DS dry-type step transformer 500 kVA R1 No. 9026106 Sheet metal package with 3 coils + P&O tap changer Rated voltage 380/221 — 907 — 944V Rated current: 760-45/78 — 318 —

DS dry-type step transformer 700 kVA; 380V

Mainly consists of: DS dry-type tapped transformer 700 kVA No. T1 No. 9026101 Sheet metal package with 3 coils + P&O tap changer Rated voltage 380/247 — 912 — 1026V Rated current: 80-1091/123 — 454

DS dry-type step transformer 850 kVA; 10kV

Mainly consists of: DS dry-type step transformer 850 kVA No. 204257 Sheet metal package with 3 O-coils + U-coils 11 contactors Control cabinet with cables Rated voltage 10,000 +- 5% / 632 V in 6

Balancing reactor 335 kVAr

Mainly consists of: Rated power: 335 kVAr // No. 204287 Rated voltage: 675 V // 50 Hz Rated current: 495 LxWxH 1320x800x1800 Total weight: 1.25t Sold as seen, EXW

Steel trough 90t

Mainly consists of: 1 steel chute ready for installation Sold as seen, EXW

RIO – Inductor 800kW

Mainly consists of: Channel inductor 800 kW Channel furnace core WF coil WF cylinder with steel vessel Total weight: 5.4 t Sold as seen, EXW

Ds-Oel step transformer 850kVA

mainly consists of: Ds-Oel step transformer 850kVA No. 8926048 Rated voltage: 20,000 +/- 5% // 180 – 780 V / 8 steps Rated current: 24.5 – 5.98 / 663 – 629 A Switching size: DY5

DISA 2110 MK3 Moulding Line

Mainly consists of: DISAMATIC Model 2110 Mk3 Allen Bradley PLC Upgraded VDU Automatic Core Setter Automatic Spray System 12 Meter AMC Technical Data: Mold Dimensions: Height: 400 mm (15.7 inches) Width: 500 mm (19.7 inches)

Planetary gearbox RSD 140V up to 30 tons pans

Planetary gearbox RSD 140V for up to 30 ton pouring ladle Nominal torque: 32,000 Nm T-max.: 51,600 I-ratio: 203 Shaft journal diameter: 140 mm

MF-TIO system VIP Dualtrack 2×12.5to 9MW with 2 charging trolleys

Mainly consists of: 2 mobile charging vehicels with load cells 2 Furnace bodies, each with a tilting chair; furnace lid and ring exhaust; 2 hydraulic cylinder Hydraulic system; hydraulic control panel and Push-out cylinder Control

Automatic Grinder 20HP/PS, 480V/3/60

Mainly consists of: Specifications Work Envelope 20" dia x 7.8" H (500 mm dia x 200 mm H) Max Total Weight (Part + Fixture and other loading materials) 110 lbs (50 kg) Standard Main Tool

1 pc. Semi-automatic molding line 1350 x 900 x 400/400 mm

Flask size: LxBxH: 1350 x 900 x 400 / 400 mm Mainly consists of: 1 Moulding machine 5 Cope & 5 Drag Flasks 1 set Filling frame (for each cope & drag) 1 set Pattern

Portable spectrometer

Mainly consists of: Portable spectrometer for metal analysis of iron, aluminum, nickel, and steel Housing Screen Storage compartment Probe holder Trolley Probe Argon cylinder holder Air filter CO2 and particulate matter filter EXW – ex

MF crucible furnace system Duomelt with 12t and 18t furnace vessels

Mainly consists of: -2 pc. MF furnace bodies (18 tons & 12 tons) -Tilting chair with hydraulic cylinder -Furnace lid with exhaust system -1pc. 7.000 kW/200-100 Hz converter and capacitor cabinet -Control panel -2 pc.

Ingot Casting Machines

Mainly consists of: Conveyor belt with casting molds Air cooling molds Mold preheating station with gas burner Control cabinet with frequency converter (speed setting) Transfer and buffer channel for filling the ingots approx. 70 pcs.

MF-Induction furnace 1,7 t

Mainly consists of: Crucible furnace with tilting chair, hydraulic cylinder, furnace lid and weighing device Hydraulic system with hydraulic control panel and crucible push-out device Furnace platform made of steel IGBT converter type: ITP-2; 600

JOST Shakeout machine & Sand conveyor

Mainly consists of: 1 Jost Shakeout machine (upper part ) TWFE 1200/1382 – 300×6200 with 2 Motors Jost 4 WE 1500/160 M 400V 50Hz 1 Sand conveyor (underneath part) FSL 1200 /1300 – 100×10000 with

MF crucible furnace system 2 t

Mainly consists of: MF-Crucible furnace with tilting chair, hydraulic cylinder without furnace cover Converter: 1,250kW/250Hz new ABP control system GS choke 11.2 mH: 1050A NEW Year: 2014 GS choke 11.2 mH: 1050A Used Year: 1994

Vibratory conveyor with unbalanced drive for transporting castings

Mainly consists of: 1x Vibratory conveyor with 2 nos. unbalanced drives Technical data: Power: 2x 3.2 kW Weight: 1640 kg Dimensions: 4080 x 1190 x 1080 mm Drive type: 2 x R3500/6 Voltage: 400 V

CNC Turning Center

Mainly consists of: 1x CNC Turning Center including chip transport Technical data: Maximum distance above the bed Ø 600 mm Maximum turning diameter Ø 355 mm Maximum turning length 440 mm Maximum bar diameter mm

Disamatic vertical flaskles Moulding Line 2070 A

Chamber size: Height 700 mm / Widht 950 mm Mould thickness 200 – 650 mm Mainly consists of: Moulding Machine (DMM – 5,9 Mil. original moulds produced only until now) SSU PMC 14 m SBC

Runner breaker

Mainly consists of: Main body of the crusher Hydraulic unit Electric cabinet Hopper – inkl. Protection and support structure Skip loader and its support structure Vibrating conveyor 900 x 3500 mm As seen, ex works,

No-Bake Shake out

Sand throughput: 90 t per 12,5 h average Sank temperature at knockout: 300-400 °C The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox

Bale out furnace for brass casting

Melting pot, electrically heated Melting capacity 350 kg/h As seen, without dismantling, EXW – ex works Germany

Hot Box Core shooter 5 l

Mainly consists of: Hot Box Core shooting machine with PLC control S7-200 Discharge conveyor belt EXW- ex Works, as seen without dismantling from Germany

Hot Box Core shooter 5 l

Mainly consists of: Hot Box core shooting machine 5 liters with PLC control S5-100U CPU103 Discharge conveyor belt EXW- ex Works, as seen without dismantling from Germany

Hot Box Core shooter 5 l

Mainly consists of: Hot Box Core shooting machine with PLC control S5-100U CPU103 Discharge conveyor belt EXW- ex Works, as seen without dismantling from Germany

Hot Box Core shooter 5 l

Mainly consists of: Hot Box Core shooting machine with PLC control S7-200 Discharge conveyor belt EXW- ex Works, as seen without dismantling from Germany

Hot Box Core shooter 5 l

Mainly consists of: Hot Box Core shooting machine with PLC control S7-200 Discharge conveyor belt EXW- ex Works, as seen without dismantling from Germany

Hot Box Core shooter 8 l

Mainly consists of: Hot Box core shooting machine with PLC control S5-115U Discharge conveyor belt EXW- ex Works, as seen without dismantling from Germany

Bale out furnace

3 pieces available Volume each approx 500 kg EXW- ex Works, as seen without dismantling from Germany

Melting furnace BP

Melting furnace content 2800 kg usable content 2300 Kg EXW- ex Works, as seen without dismantling from Germany

Annealing furnace -gasheated-

Techn. details: Heating: Natural gas Capacity: 160 kW Charging: Brass and bronze casting Max. charge weight: 2,700 kg Temperature control range: 480°C – 700 °C Max. furnace temperature: 720°C Power supply: 400 V, 50 Hz

Melting Furnace BP for brass casting

Total content 2800 kg usable contant 2300 Melting capacity: 270 kg/h Installed power 95 kVA Acting power 85 kW Nozzle heating 1.2 m³/h gas EXW- ex Works, as seen without dismantling from Germany

Automatic low pressure die casting maschine for brass casting

Tool dimension d=500 mm LP- Die casting machine Melting furnace content 3100 kg Melting capacity 600 kg/h Installed power 95 kVA acting power 85 kW nozzle heating 1.2m³/h gas 2 manipulators in diameter cast pieces

Melting Furnace BP for brass casting

Melting furnace content 2300 kg Melting capacity: 270 kg/h Installed power 95 kVA Acting power 85 kW Nozzle heating 1.2 m³/h gas EXW- ex Works, as seen without dismantling from Germany

Automatic low pressure die casting maschine for brass casting

Melting Furnace BP for brass casting

Melting furnace content 2300 kg Installed power 95 kVA Acting power 85 kW Nozzle heating 1.2 m³/h gas EXW- ex Works, as seen without dismantling from Germany

Automatic low pressure die casting maschine for brass casting

Tool dimension d=500 mm LP- Die casting machine Melting furnace content 3100 kg Installed power 95 kVA acting power 85 kW nozzle heating 1.2m³/h gas 2 manipulators in diameter cast pieces 200-500 mm piece weight

Low pressure diecasting system for brass casting

Tool dimensions d=550 mm Melting capacity 350 kg/h incl. ingot carousel As seen, without dismantling, EXW – ex works Germany

Gravity Diecasting plant for brass casting

Technical details: for tool dimensions within a diameter of 420 mm Production capacity 350 kg/h installed power 4 kW Hydraulics 175 l Graphite tanks with agitator volume content 650 l max external dimensions: 1600x2100x1700 mm

Gravity Diecasting plant for brass casting

Technical details: for tool dimensions within a diameter of 420mm Production capacity 350 kg / hour installed power 4 kW Hydraulics 175 l Graphite tanks total volume 650 l max external dimensions: 1600x2100x1700 mm No

Gravity Diecasting plant for brass casting

How it works

On this page you will find a variety of used foundry equipment for sale. In our stock list you will find plants from the areas of moulding, sand plants, core making, cleaning, conveyor, measuring technology and dedusting.

The purchase of used foundry equipment is often an economically interesting alternative of buying a new plant.

Benefit from our specialist know-how – We accompany our customers from professional advice, recording customer needs, procurement of the required plants, sales and monitoring of the entire project up to the reconstruction of the acquired plant.

We offer you a comprehensive all-round service – once the right system has been found, we will of course also take care of its dismantling, packaging and loading in containers or on trucks as well as all customs and shipping matters. We can respond flexibly to all customer requests.

If necessary and possible, we also offer overhaul, modernization, upgrading etc. in our factory and cold start of the plant before shipping.

With every step and every task, our customers can rely on our great professional competence and experience, which we have been able to continuously optimize through decades of services in the industry.

Our strengths in the trade of used foundry equipment at a glance:

Longterm experience in all areas of iron and non-iron foundries
Extensive know-how in the field of technology, sales and marketing of used foundry plants from well-known manufacturers (such as DISA, Sinto, Laempe, Eirich, Webac, ABP, Inductotherm and Junker)
Close cooperation with the manufacturers
Large network of international partners and industry representatives

We are also your partner when it comes to moving existing facilities (foundry relocation) or services relating to your existing facility.

Did you know that we send out two to three newsletters a month to inform you about our new additions to used foundry equipment? If you no longer want to do without one of our offers, please subscribe to our newsletter.

Please do not hesitate to contact us if you find a suitable system in our stock list.

Offers

Used foundry equipment

How it works

Kontakt

Folge uns

Gebrauchte Anlagen

Unternehmen

Weitere Links

Foundry Partner

Start typing and press enter to search